+86-186 8208 3519 
sales@haomaitest.com
RELAYSTAR-6000D IEC 61850 Test System
Test solution for IEC 61850-based protection devices and Merging Unit
The RELAYSTAR-6000D is new generation test set dedicated to IEC 61850-based protection devices and Merging Unit. It can simulate various types of messages which conforms to IEC 61850-9-1/9-2/9-2LE, GOOSE, IEC 60044-7/8 FT3.
sales@haomaitest.com - Descriptions
- Specifications
- Download
- Video
Descriptions
The RELAYSTAR-6000D is new generation test set dedicated to IEC 61850-based protection devices and Merging Unit. It can simulate various types of messages which conforms to IEC 61850-9-1/9-2/9-2LE, GOOSE, IEC 60044-7/8 FT3.
IEC 61850 Test System RELAYSTAR-6000D can either be operated by embedded industrial PC with 9.7’’ touch screen or by test software running on a PC.
The time synchronization modes GPS, IRIG-B code and IEEE1588 are supplied along with RELAYSTAR-6000D, which makes both substation internal debugging and substation to substation joint debugging available.
The main features of IEC 61850 Test System RELAYSTAR-6000D are as follows:
●IEC 61850-based protection devices & MU can be tested
●Embedded industrial PC with 9.7’’ touch screen
●Both local test and PC remote test available
●Able to simulate various types of messages which conforms to IEC 61850-9-1/9-2/9-2LE, GOOSE, IEC 60044-7/8 FT3
●12 low level analog outputs
●Four time synchronization modes: in-built GPS, IRIG-B code, PPS and IEEE1588
●Small size and light weight(only 4kg / 8.82lb)
Specifications
Ethernet Communication Interfaces
|
Mode |
10/100Base-TX(10/100Mbit,twisted-pair,auto-crossover) |
|
Number of port |
2 |
|
Type of interface |
RJ45 |
|
Status indication |
LED lights |
Optical Fiber Communication Interfaces
|
Mode |
100Base-FX (100Mbit, optical fiber, full duplex) |
|
Number of port |
16 |
|
Type of interface |
ST |
|
Fiber type |
62.5/125μm(multi-mode fiber) |
|
Wavelength |
1310nm |
|
Transmission distance |
>1km |
|
Status indication |
LED lights |
FT3 Interfaces
|
Number of port |
10 (8 for transmitting, 2 for receiving) |
|
Type of interface |
ST |
|
Fiber type |
62.5/125μm (multi-mode fiber) |
|
Wavelength |
850nm |
Low Level Analog Outputs
|
Number of outputs |
12 |
|
Setting range |
AC: 0~7.07Vrms; DC: 0~10V |
|
Current at max. burden |
1mA |
|
Accuracy |
<0.05% |
|
Resolution |
250μV |
|
Distortion (THD+N) |
<0.1% |
|
Frequency |
Sinusoidal signal: 10~1000Hz |
|
Transient signal: DC~10.0kHz |
|
|
Accuracy: <0.002%(under power frequency, error 1mHz) |
|
|
Resolution: 0.001Hz |
|
|
Phase |
Range of phase angle: 0 ~359. 9° |
|
Accuracy: <0.1°, 50/60Hz |
|
|
Resolution: ±0.01° |
Binary Inputs
|
Number |
10 |
|
Type |
potential-free contact or idle contact (automatic identification) |
|
Threshold characteristics |
“0”: 0～6V; “1”:12V～250V |
Binary Outputs
|
Number |
4 |
|
Type |
idle contact(fast contact output optional) |
|
Break capacity |
250VAC/0.5A; 250VDC/0.2A |
Power Supply
|
Nominal input voltage |
customized (AC230V/120V±10%, 1-phase) |
|
Nominal frequency |
50/60 Hz |
|
Rated current |
10A at 230V / 12A at 120V |
|
Connection |
Standard AC socket (IEC 60320) |
Environmental Conditions
|
Operation temperature |
0 ... +50 °C (+32 ... +122 °F) |
|
Storage temperature |
-25 ... +70 °C (-13 ... +158 °F) |
|
Humidity range |
relative humidity 5 ... 95 %, non-condensing |
|
Vibration |
IEC 60068-2-6(20m/s2 at 10 ... 150 Hz) |
Miscellaneous
|
Weight |
4kg(8.82 lb) |
|
Dimensions (W x H x D, without handle) |
345×135×270mm(13.58x5.31x10.63 in) |
IEC 61850 Protection Relay Test System RELAYSTAR-6000D focuses on the real-time communication methods of GOOSE and Sampled Values to interface with the devices under test.
Download
sales@haomaitest.com
+86 186 8208 3519
Copyright © 2020 HAOMAI ELECTRIC TEST EQUIPMENT CO.,LTD All rights Reserved.
备案号：粤ICP备2021107667号
